topic Load balancer bandwidth calculation in Network Access Control https://community.cisco.com/t5/network-access-control/load-balancer-bandwidth-calculation/m-p/3543108#M511843 <HTML><HEAD></HEAD><BODY><P>is there a way to calculate the bandwidth requirements for the load balancers to load balance the PSNs? </P></BODY></HTML> Mon, 05 Mar 2018 17:45:33 GMT harrzhan 2018-03-05T17:45:33Z Load balancer bandwidth calculation https://community.cisco.com/t5/network-access-control/load-balancer-bandwidth-calculation/m-p/3543108#M511843 <HTML><HEAD></HEAD><BODY><P>is there a way to calculate the bandwidth requirements for the load balancers to load balance the PSNs? </P></BODY></HTML> Mon, 05 Mar 2018 17:45:33 GMT https://community.cisco.com/t5/network-access-control/load-balancer-bandwidth-calculation/m-p/3543108#M511843 harrzhan 2018-03-05T17:45:33Z Re: Load balancer bandwidth calculation https://community.cisco.com/t5/network-access-control/load-balancer-bandwidth-calculation/m-p/3543109#M511845 <HTML><HEAD></HEAD><BODY><P>I am not sure your ask here.</P><P></P><P>Most load balancers are in the same LAN as PSNs or other real servers so that bandwidth between the load balancers and the real servers not an issue.</P><P></P><P>The other end will be either between the load balancers and NADs or between the load balancers and the endpoints. The most significant might be to perform web deploys from ISE PSNs, because the AnyConnect modules, for example, are sizable.</P></BODY></HTML> Fri, 09 Mar 2018 02:39:40 GMT https://community.cisco.com/t5/network-access-control/load-balancer-bandwidth-calculation/m-p/3543109#M511845 hslai 2018-03-09T02:39:40Z