Enable password remote authentication with ISE

vaibhgupta157 — Wed, 14 Feb 2018 06:16:33 GMT

Hi All,

I have one requirement to do two level of authentication in NAS device, one for simple login and second one for enable password.

Device--------------------------------------ISE------------------------------------OpenOtp

TACACS+ RADIUS

In first level, user needs to enter username and password which needs to be authenticated against integrated LDAP/AD or internal user database of ISE. After first level of authentication, user should be put into privilege level 1 in device. User types “enable” command in CLI, which prompts for second level password. This second level enable password should be a token password authenticated with a token server (OpenOtp)

First Level of authentication is working fine. But enable password is not working. I have integrated OpenOtp as RADIUS Token server in ISE. I am referring thread: Cisco ISE Two Factor Authentication / Authorisation with different User Identity Store

Device and ISE configuration and ISE logs are attached. ISE logs shows success for enable authentication but device gives access denied. Device accepts the local enable password. Is there something I am missing in configuration??

Thanks in advance

Regards//

Vaibhav

Re: Enable password remote authentication with ISE

hslai — Wed, 21 Feb 2018 03:01:40 GMT

I think you would need debugging on the device side and seek support from the device support team. We validate it in the lab on a Cisco switch 3850 or 3650 or CSR 1000v only.

topic Enable password remote authentication with ISE in Network Access Control

Enable password remote authentication with ISE

Re: Enable password remote authentication with ISE