topic Re: ISE Node not syncing in Network Access Control

ISE Node not syncing

nikhilcherian — Fri, 02 Feb 2018 06:37:45 GMT

Dear All

In my setup, I have two locations, Tower 1 & Tower 2. I have a PAP-T1, PSN-T1 & a MNT-T1 in Tower1 & only one PSN1-T2 in Tower2. All are in sync & running ISE 2.2 patch 3. Tower 1 & Tower 2 are connected across WAN.

I am trying to add a PSN node(PSN2-T2) to cluster from Tower 2. PSN1-T1 & PSN1-T2 are in the same subnet. Once I add the the node PSN2-T2, I see the message, "Sync is Progress" . After a while I get the message, Registration failed.

I tried to factory reset the configuration PSN2-T2, still the issue is same.

How can I troubleshoot this further

Regards

Nikhil

Re: ISE Node not syncing

hslai — Fri, 02 Feb 2018 14:42:31 GMT

If not already done, please engage Cisco TAC on this.

You may tail on ADE.log on each of the primary PAN (PAP-T1?) and PSN2-T2 by admin CLI "terminal len 0" and then "show logging system ade/ADE.log" while re-attempting the registration process. I suspect the issue is either export the db from the primary or import it to the secondary node.

Re: ISE Node not syncing

nikhilcherian — Tue, 06 Feb 2018 14:25:04 GMT

Sry.. i couldn't check the reply.. thank you for the response

Re: ISE Node not syncing

toyip — Thu, 25 Oct 2018 18:27:09 GMT

Would the support bundle from ISE provide the same information as the "show logging system ade/ADE.log" output?

Re: ISE Node not syncing

hslai — Thu, 25 Oct 2018 19:40:59 GMT

If generating a support bundle from ISE admin web UI, please ensure to select [ Include system logs ].