topic Re: ISE 2.x internal user password change portal in Network Access Control

ISE 2.x internal user password change portal

Qingguo Zhang — Fri, 15 Dec 2017 16:54:38 GMT

Hi team experts

is there a quick way to test internal user password change workflow ( should be portal ) ? suppose i don't have a mail server setting to get email alter when password is going to expire.

thanks

Qingguo

Re: ISE 2.x internal user password change portal

Jason Kunst — Fri, 15 Dec 2017 16:56:54 GMT

You can change your password using sponsor or my devices portals.

https://communities.cisco.com/thread/73087?start=0&tstart=0

Re: ISE 2.x internal user password change portal

Qingguo Zhang — Fri, 15 Dec 2017 17:10:51 GMT

Thanks for quick answer.

Does it support enable password change in the portal ? as i know there is same password policy for login and enable for particular user.

Re: ISE 2.x internal user password change portal

Jason Kunst — Fri, 15 Dec 2017 17:11:54 GMT

No, please reach out to our product managers if need of a true password change portal

Re: ISE 2.x internal user password change portal

hslai — Fri, 15 Dec 2017 21:43:24 GMT

Along with our previous discussion on ISE 2.x enable password authentication behavior

For T+,

You can engage user-change password for either password in the same way for enable and login password, by leaving the password blank, then going through the password flow.

If the device supports it then chpass can be used for either login or enable.

Re: ISE 2.x internal user password change portal

Qingguo Zhang — Sat, 16 Dec 2017 01:56:36 GMT

Thanks Jason and Hslai. Really helpful.