topic Re: ACS and DNAC integration in Network Access Control

ACS and DNAC integration

Shantha Kumar Selvaraj — Wed, 29 Nov 2017 05:49:10 GMT

Hi,

Is there any documentation for ACS and DNAC integration

Thanks

Re: ACS and DNAC integration

kthiruve — Wed, 29 Nov 2017 06:42:42 GMT

Hi,

ACS does not integrate with DNAC. ISE is the next generation ACS that you can use to integrate with DNAC.

Please see ACS vs ISE differences that speaks about all of differences between ACS and ISE.

https://communities.cisco.com/docs/DOC-63901

also look at http://cs.co/ise-community for further information on ISE.

-Krishnan

Re: ACS and DNAC integration

Charlie Moreton — Wed, 29 Nov 2017 12:09:17 GMT

To build upon Krishnan's response, the minimum version of ISE that can be used with DNA Center is v 2.3. This integration is done through pxGrid. Once the two products are integrated, you can utilize the Device Administration (TACACS+) functionality in ISE as long as you have the required license.

Re: ACS and DNAC integration

Jason Kunst — Wed, 29 Nov 2017 12:56:00 GMT

ACS is going away

https://www.cisco.com/c/en/us/products/security/secure-access-control-system/eos-eol-notice-listing.html

Re: ACS and DNAC integration

Shantha Kumar Selvaraj — Wed, 29 Nov 2017 13:16:06 GMT

Thanks a lot.

Would you know how is the Authorization defined at DNAC and ISE.I see avpair,but when i define role it gives error.