topic Re: How to resolve ISE 2.2 patch 3 cisco bug without install patch 4 in Network Access Control https://community.cisco.com/t5/network-access-control/how-to-resolve-ise-2-2-patch-3-cisco-bug-without-install-patch-4/m-p/3495648#M519590 <HTML><HEAD></HEAD><BODY><P>You should contact the TAC on all break fix issues</P><P></P><P>likely they will tell you that you have to install patch 4 as it’s the recommended path</P><P></P><P>what is your problem with that?</P></BODY></HTML> Wed, 22 Nov 2017 13:01:49 GMT Jason Kunst 2017-11-22T13:01:49Z How to resolve ISE 2.2 patch 3 cisco bug without install patch 4 https://community.cisco.com/t5/network-access-control/how-to-resolve-ise-2-2-patch-3-cisco-bug-without-install-patch-4/m-p/3495647#M519589 <HTML><HEAD></HEAD><BODY><P>Hello community i want to share how i resolve this bug</P><P class="bugTitle">Unable to load Context Visibility all shards failed due to CircuitBreakingException</P><P class="bugId">CSCvf42061. I know it is fixed in patch 4 ,but maybe in use for someone who not updated to patch 4.</P><P class="bugId"></P><P class="bugId">There are&nbsp; Administratory nodes ise 2.2 patch 3 installed on both.</P><P class="bugId">When you reboot first and after it show again it hit this bug .</P><P class="bugId">No endpoint no visibility page .</P><P class="bugId">Just go to deployment and sync with other node .</P><P class="bugId">After the sync complete you will have endpoints and visibility page working.</P></BODY></HTML> Wed, 22 Nov 2017 08:13:29 GMT https://community.cisco.com/t5/network-access-control/how-to-resolve-ise-2-2-patch-3-cisco-bug-without-install-patch-4/m-p/3495647#M519589 ognyan.totev 2017-11-22T08:13:29Z Re: How to resolve ISE 2.2 patch 3 cisco bug without install patch 4 https://community.cisco.com/t5/network-access-control/how-to-resolve-ise-2-2-patch-3-cisco-bug-without-install-patch-4/m-p/3495648#M519590 <HTML><HEAD></HEAD><BODY><P>You should contact the TAC on all break fix issues</P><P></P><P>likely they will tell you that you have to install patch 4 as it’s the recommended path</P><P></P><P>what is your problem with that?</P></BODY></HTML> Wed, 22 Nov 2017 13:01:49 GMT https://community.cisco.com/t5/network-access-control/how-to-resolve-ise-2-2-patch-3-cisco-bug-without-install-patch-4/m-p/3495648#M519590 Jason Kunst 2017-11-22T13:01:49Z