topic Re: WLC recommended code for ISE in Network Access Control

WLC recommended code for ISE

andrew333 — Tue, 24 Oct 2017 16:35:09 GMT

What are the current code versions recommended for the 7510 and 5508 Wireless Lan Controllers for ISE 2.2 integration?

Thanks,

Andrew

Re: WLC recommended code for ISE

Charlie Moreton — Tue, 24 Oct 2017 16:37:15 GMT

This is covered here:

Cisco Identity Services Engine Network Component Compatibility, Release 2.2 - Cisco

Re: WLC recommended code for ISE

andrew333 — Tue, 24 Oct 2017 17:10:35 GMT

Thanks for responding Charles. I have seen the compatibility guide which gives general guidance for feature compatibility and is a few months old now. In the past, recommendations have been given at PVT events and Cisco Live! such as Craig Hyps' best practices lecture. I couldn't make the SEVT last week but was wondering if new guidance had been shared.

Re: WLC recommended code for ISE

hslai — Tue, 24 Oct 2017 17:46:33 GMT

Craig's presentation this time has no content on WLC. I would suggest you to check out TAC Recommended AireOS - CCO

Re: WLC recommended code for ISE

andrew333 — Tue, 24 Oct 2017 17:50:11 GMT

Thanks hslai, I found that too. My customer is requesting a firm recommendation with a stamp of approval from Cisco so I'll open a TAC case.

Re: WLC recommended code for ISE

Craig Hyps — Wed, 25 Oct 2017 22:21:55 GMT

So if you look in the reference version of BRKSEC-3699, you will certainly find reference to the link Hsing provided above. No need to call TAC as the link is exactly TAC's recommended WLC release. And this is maintained by the escalation leads from BU/TAC.

Craig

Re: WLC recommended code for ISE

andrew333 — Fri, 27 Oct 2017 14:43:01 GMT

I appreciate the addition Craig, thanks.