topic Re: ISE TACACS 3rd party support in Network Access Control https://community.cisco.com/t5/network-access-control/ise-tacacs-3rd-party-support/m-p/3597733#M521248 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>There is no limitation with ISE it should work on all devices.</P><P>ISE works to the T+ spec so as long as your compliant you should be good.</P><P></P><P>Thanks,</P><P>Danny</P></BODY></HTML> Thu, 28 Sep 2017 11:09:23 GMT ldanny 2017-09-28T11:09:23Z ISE TACACS 3rd party support https://community.cisco.com/t5/network-access-control/ise-tacacs-3rd-party-support/m-p/3597732#M521246 <HTML><HEAD></HEAD><BODY><P>Hi </P><P></P><P>I know that Tacacs is an industry standard protocol, so ISE can support 3rd party devices as well. Do we lose any Tacacs feature with 3rd party devices? Or is there any limitation? </P><P>I am asking this for a service provider which may use Juniper, Huawei, etc CPE devices as well.</P><P></P><P>Thanks</P></BODY></HTML> Thu, 28 Sep 2017 10:51:34 GMT https://community.cisco.com/t5/network-access-control/ise-tacacs-3rd-party-support/m-p/3597732#M521246 ozgguler 2017-09-28T10:51:34Z Re: ISE TACACS 3rd party support https://community.cisco.com/t5/network-access-control/ise-tacacs-3rd-party-support/m-p/3597733#M521248 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>There is no limitation with ISE it should work on all devices.</P><P>ISE works to the T+ spec so as long as your compliant you should be good.</P><P></P><P>Thanks,</P><P>Danny</P></BODY></HTML> Thu, 28 Sep 2017 11:09:23 GMT https://community.cisco.com/t5/network-access-control/ise-tacacs-3rd-party-support/m-p/3597733#M521248 ldanny 2017-09-28T11:09:23Z