topic Re: ISE 2.2 WiFi Setup refuses to stay disabled in Network Access Control

ISE 2.2 WiFi Setup refuses to stay disabled

Arne Bier — Mon, 12 Jun 2017 23:29:39 GMT

I have a fresh ISE 2.2 install. WiFi Setup running and even after I disabled it, after a reboot it's enabled again - is this expected behaviour?

admin# application configure ise [17]Enable/Disable Wifi Setup

admin# show cpu usage | include WIFI
WIFI Setup N/A

<< Reboot server >>
Checked with application configure ise ...

"Wifi Setup is currently running. Are you sure you want to disable it? [y/n]"

admin# show cpu usage | include WIFI
WIFI Setup 0.00 0:00.04 1

thanks and regards

Arne

Re: ISE 2.2 WiFi Setup refuses to stay disabled

Jason Kunst — Tue, 13 Jun 2017 15:24:07 GMT

Please log bug with TAC

Re: ISE 2.2 WiFi Setup refuses to stay disabled

hslai — Tue, 13 Jun 2017 17:50:17 GMT

CSCve84287 logged to track this.

Re: ISE 2.2 WiFi Setup refuses to stay disabled

dazza_johnson — Tue, 13 Jun 2017 22:25:17 GMT

Haha, I noticed this yesterday too! I can't see this bug in the toolkit (is it marked as private to Cisco?). Can you update here if there is a fix to save creating another TAC case for the same issue.

Thanks

Re: ISE 2.2 WiFi Setup refuses to stay disabled

hslai — Tue, 13 Jun 2017 23:39:23 GMT

I opened the bug ~ 6 hours ago and usually it takes a couple of days to become externally visible. In my own tests, the up-coming patch 2 seems to have fixed it.

Re: ISE 2.2 WiFi Setup refuses to stay disabled

dazza_johnson — Wed, 14 Jun 2017 09:16:36 GMT

It is there now but marked as Cisco proprietary / private....

Re: ISE 2.2 WiFi Setup refuses to stay disabled

hslai — Wed, 14 Jun 2017 14:36:29 GMT

It's showing as "Customer Visible" now so I am guessing your last view was done right before Cisco team reviewed it and approved the bug info enclosure. I updated the info again this morning and again will take another day for my update to show up.