topic Re: ISE will not re-start, AD connector is not running in Network Access Control https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532392#M524870 <HTML><HEAD></HEAD><BODY><P>Yes the lab ISE is still in this state. The db is still locked.</P></BODY></HTML> Tue, 16 May 2017 14:31:42 GMT lcammara 2017-05-16T14:31:42Z ISE will not re-start, AD connector is not running https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532390#M524868 <HTML><HEAD></HEAD><BODY><P>AD connector not running</P><P>Attempted to Stop and Start ISE. </P><P>Received the following:</P><P></P><P>ise/admin# app stop ise</P><P>Waiting up to 20 seconds for lock: APP_START to complete<BR />Database is still locked by lock: APP_START. Aborting. Please try it later<BR />% Error: Another ISE DB process (APP_START) is in progress, cannot perform Application Stop at this time</P><P>ise/admin#</P></BODY></HTML> Mon, 15 May 2017 13:45:24 GMT https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532390#M524868 lcammara 2017-05-15T13:45:24Z Re: ISE will not re-start, AD connector is not running https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532391#M524869 <HTML><HEAD></HEAD><BODY><P>The message means the previous application start is still on-going.</P><P>Assuming your lab setup and if it still in this state, please unicast me the access info or we may discuss further offline. If a customer setup, please engage TAC.</P></BODY></HTML> Mon, 15 May 2017 14:17:59 GMT https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532391#M524869 hslai 2017-05-15T14:17:59Z Re: ISE will not re-start, AD connector is not running https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532392#M524870 <HTML><HEAD></HEAD><BODY><P>Yes the lab ISE is still in this state. The db is still locked.</P></BODY></HTML> Tue, 16 May 2017 14:31:42 GMT https://community.cisco.com/t5/network-access-control/ise-will-not-re-start-ad-connector-is-not-running/m-p/3532392#M524870 lcammara 2017-05-16T14:31:42Z