topic Re: NAC authentication page URL in Network Access Control

NAC authentication page URL

blaxucisco — Fri, 21 Feb 2020 18:24:55 GMT

Hi all,

is there any option to configure ip address and FQDN both for the NAC authentication URL on the base of vlan?

Thank you

Re: NAC authentication page URL

Faisal Sehbai — Mon, 05 Jul 2010 21:10:56 GMT

Laxman,

You can have user pages based off of VLANs or OSs. Look at the User Pages section on the CAM gui.

HTH,

Faisal

Re: NAC authentication page URL

blaxucisco — Mon, 05 Jul 2010 23:15:26 GMT

Hi Faisal,

sorry, my question was not clear as per my requirement.
my requirement is like this. if users from vlan 100 and 101 they should get NAC authentication page by ip address e.g. https://192.168.1.20/login.html and if users from the vlan 200 and 202 they should get https://nacserver.domain.com/login.html. tried to configure userpages but I couldn't find the URL address related configuration.

Thank you

Laxman

Re: NAC authentication page URL

Faisal Sehbai — Tue, 06 Jul 2010 00:27:24 GMT

Laxman,

That isn't possible. The redirection happens with whatever you have configured as your certificate name, so if cert is to an IP, the redirection happens to that IP. If cert's to a name, redirection happens there. You can't have two URLs set for redirection.

HTH,

Faisal

Re: NAC authentication page URL

blaxucisco — Tue, 06 Jul 2010 00:30:31 GMT

Faisal,

Thank you very much for your answer. now I got the clear idea about this and I can explain to my client properly.

Thank you

Laxman