topic Re: Posture Condition for checking Disk Encryption in Network Access Control https://community.cisco.com/t5/network-access-control/posture-condition-for-checking-disk-encryption/m-p/3564474#M526390 <HTML><HEAD></HEAD><BODY><P>As you already found, there is no any/all location option after selecting to check encryption state. Please take it up with our PM team.</P></BODY></HTML> Mon, 09 Oct 2017 13:40:23 GMT hslai 2017-10-09T13:40:23Z Posture Condition for checking Disk Encryption https://community.cisco.com/t5/network-access-control/posture-condition-for-checking-disk-encryption/m-p/3564473#M526389 <HTML><HEAD></HEAD><BODY><P>We are working with a customer that would like to posture BYOD and Corporate Endpoints for Disk Encryption. We would like to define disk encryption checks for Disks (partitions) that are configured on the endpoint, however since the endpoint configurations are not consistent, i.e. some endpoints may have just C: drive, other may have D;, E:, etc.</P><P></P><P>We have defined Disk Encryption Check for C:, D:, E; but this results in non-compliance for endpoints that do not have E: or D:.</P><P></P><P>I would like to know if Posture Agent can be configured to check Disk Encryption for all disk parttions that are configured on an endpoint. (Windows &amp; Apple Macs)</P></BODY></HTML> Sun, 08 Oct 2017 22:25:54 GMT https://community.cisco.com/t5/network-access-control/posture-condition-for-checking-disk-encryption/m-p/3564473#M526389 nved 2017-10-08T22:25:54Z Re: Posture Condition for checking Disk Encryption https://community.cisco.com/t5/network-access-control/posture-condition-for-checking-disk-encryption/m-p/3564474#M526390 <HTML><HEAD></HEAD><BODY><P>As you already found, there is no any/all location option after selecting to check encryption state. Please take it up with our PM team.</P></BODY></HTML> Mon, 09 Oct 2017 13:40:23 GMT https://community.cisco.com/t5/network-access-control/posture-condition-for-checking-disk-encryption/m-p/3564474#M526390 hslai 2017-10-09T13:40:23Z