topic ISE 2.3 No data available in Network Access Control https://community.cisco.com/t5/network-access-control/ise-2-3-no-data-available/m-p/3430402#M526432 <HTML><HEAD></HEAD><BODY><P>I'm using the device admin tacacs function in ISE 2.3. I see no no data available in the dashboard applet but showing 1065 total endpoints.</P></BODY></HTML> Wed, 04 Oct 2017 16:29:42 GMT boonesc01 2017-10-04T16:29:42Z ISE 2.3 No data available https://community.cisco.com/t5/network-access-control/ise-2-3-no-data-available/m-p/3430402#M526432 <HTML><HEAD></HEAD><BODY><P>I'm using the device admin tacacs function in ISE 2.3. I see no no data available in the dashboard applet but showing 1065 total endpoints.</P></BODY></HTML> Wed, 04 Oct 2017 16:29:42 GMT https://community.cisco.com/t5/network-access-control/ise-2-3-no-data-available/m-p/3430402#M526432 boonesc01 2017-10-04T16:29:42Z Re: ISE 2.3 No data available https://community.cisco.com/t5/network-access-control/ise-2-3-no-data-available/m-p/3430403#M526434 <HTML><HEAD></HEAD><BODY><P>Most of the dashlets are specific to RADIUS so we would not expect to see any data on them. You should, however, see data in dashlets, such as system summary.</P><P></P><P>Note a recent bug -- CSCvg08372</P></BODY></HTML> Wed, 04 Oct 2017 16:39:55 GMT https://community.cisco.com/t5/network-access-control/ise-2-3-no-data-available/m-p/3430403#M526434 hslai 2017-10-04T16:39:55Z