Fresh license file needed when rebuilding both the PAN

umahar — Fri, 18 Aug 2017 14:16:16 GMT

We have 2 PAN/MNT and 2 PSNs in a cluster. Due to issues at VM level the customer wants to rebuild the Admin Nodes. We already built a fresh secondary admin node and joined to the cluster and are now planning to rebuild the primary admin node.

Since serial number of both the PANs would be new , will the license generated using the old serial number be invalid ?

Re: Fresh license file needed when rebuilding both the PAN

Charlie Moreton — Fri, 18 Aug 2017 14:41:45 GMT

You can re-host the licenses onto your new servers

First and foremost, you must have a current, non-expired license.

The best way to accomplish this is to log in to the Licensing Portal:

https://slexui.cloudapps.cisco.com/SWIFT/LicensingUI/Quickstart

Click on Licenses. Choose the license you would like to assign to both ISE Admin Nodes.

Note that I have selected two licenses, Base and Advanced. You can only select ONE LICENSE at a time. To Re-Host a Base, Plus, Apex, and Device Admin License, you must do this four times.

Then click Actions > Rehost/Transfer...

A new window will appear requesting the information from your new VM Appliance (you must have already installed ISE on the appliance):

You can find this information on the new ISE by going to CLI and issuing the command show udi.

This is all found in the ISE Admin Guide.

Cisco Identity Services Engine Administrator Guide, Release 2.1 - Cisco ISE Licenses [Cisco Identity Services Engine] -…

topic Re: Fresh license file needed when rebuilding both the PAN in Network Access Control

Fresh license file needed when rebuilding both the PAN

Re: Fresh license file needed when rebuilding both the PAN