topic ISE splash page issue in Network Access Control

ISE splash page issue

irtaza.hassan — Thu, 17 Aug 2017 15:52:53 GMT

Hi All

I am working on a guest solution where I have got 3x SSID's and 3x splash pages hosted on ISE.

When I switch my client from SSID1 to SSID2, I still get splash page for SSID1. And same happens with SSID3 or vice versa.

Has anyone have got similar issue or is it just me.

I have noticed that after disconnecting client from wireless and client session timeout on WLC - all works ok but this only happens if you switch instantaneously.

I have got only one MAB condition for wireless MAB and 3 different authorization profiles that I am using with Calling station ID[30] to match each SSID.

Many thanks

Re: ISE splash page issue

Timothy Abbott — Thu, 17 Aug 2017 16:52:04 GMT

Make sure you are specifying the correct authorization result that has the portal you want to the SSID in authorization policy. Depending on the version of ISE you have, you can use "Normalized RADIUS:SSID" to ensure traffic from that SSID will get the correct authorization result.

Regards,

-Tim

Re: ISE splash page issue

hslai — Fri, 18 Aug 2017 23:04:04 GMT

This could be page caching issue.