ISE 2.2 Wireless Setup Wizard

PAUL GILBERT ARIAS — Thu, 27 Jul 2017 19:40:35 GMT

Hello,

I was checking the new Wireless Setup Wizard in ISE 2.2 and it seems very useful. I saw a few videos in youtube about how to run the setup and it is very simple but I have a question since everything seems to indicate that this works fine on new installations of ISE and WLCs.

Can this run on scenarios where ISE and the WLC already has some configuration? In my case ISE is already connected to the AD and the WLC. I already configured the Radius servers in WLC.

Will my existing configuration will cause issues or will it break things?

Thanks

Re: ISE 2.2 Wireless Setup Wizard

Jason Kunst — Thu, 27 Jul 2017 19:44:01 GMT

The product is in BETA so there are issues with how it works.

Please check out the info below and read over the gotchas in the admin guide. There is one that talks about AD.

Cisco Identity Services Engine Administrator Guide, Release 2.2 - What Is Wireless Setup [Cisco Identity Services Engi…

Cisco ISE Secure Access Wizard (SAW) - Guest, BYOD and Secure Access in Minutes!

topic ISE 2.2 Wireless Setup Wizard in Network Access Control

ISE 2.2 Wireless Setup Wizard

Re: ISE 2.2 Wireless Setup Wizard