topic SNMPv3 Verification in Network Access Control https://community.cisco.com/t5/network-access-control/snmpv3-verification/m-p/3492153#M528714 <HTML><HEAD></HEAD><BODY><P>I configured SNMPv3 on the network devices and Cisco ISE associate to the network device. How do I verify that Cisco ISE successfully polling my device? </P></BODY></HTML> Mon, 03 Jul 2017 13:07:30 GMT gohks 2017-07-03T13:07:30Z SNMPv3 Verification https://community.cisco.com/t5/network-access-control/snmpv3-verification/m-p/3492153#M528714 <HTML><HEAD></HEAD><BODY><P>I configured SNMPv3 on the network devices and Cisco ISE associate to the network device. How do I verify that Cisco ISE successfully polling my device? </P></BODY></HTML> Mon, 03 Jul 2017 13:07:30 GMT https://community.cisco.com/t5/network-access-control/snmpv3-verification/m-p/3492153#M528714 gohks 2017-07-03T13:07:30Z Re: SNMPv3 Verification https://community.cisco.com/t5/network-access-control/snmpv3-verification/m-p/3492154#M528715 <HTML><HEAD></HEAD><BODY><P>You can simply delete a CDP or LLDP enabled endpoint from the ISE context directory that is connected to the switch enabled with SNMPv3. If configured properly, you should see endpoint profile with SNMP Query probe data if the endpoint device supports CDP or LLDP.</P></BODY></HTML> Mon, 03 Jul 2017 16:16:21 GMT https://community.cisco.com/t5/network-access-control/snmpv3-verification/m-p/3492154#M528715 howon 2017-07-03T16:16:21Z