topic ISE 2.1 guest portal setup without login fields in Network Access Control

ISE 2.1 guest portal setup without login fields

Tim Baum — Tue, 07 Mar 2017 00:05:17 GMT

Is there a way to have a guest portal for self registration without the login fields?

Or is there a way to upload HTML pages to custom build portal pages as was possible with ISE 1.4?

Thanks

Tim

Re: ISE 2.1 guest portal setup without login fields

Charlie Moreton — Tue, 07 Mar 2017 12:04:48 GMT

You could use this customization to redirect to the Create Account page:

Re: ISE 2.1 guest portal setup without login fields

Jason Kunst — Tue, 07 Mar 2017 13:56:52 GMT

pre1.3 customization was different, it allowed your own HTML

Redesigned ISE in ISE 1.3+ customization is all the same so I am not sure what 1.4 offers separate? There is nothing. ISE 2.2 offers the custom portal files where you can again upload HTML but not necessarily will help you out all the way

http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_010000.html#id_34829

Look for custom file upload

can you explain more the flow you need?

Check here for customization options that we have made as a community

ISE Guest & Web Authentication

Re: ISE 2.1 guest portal setup without login fields

Tim Baum — Wed, 08 Mar 2017 01:28:22 GMT

Customer wants to use the self registration guest portal with sponsor authorization but not the guest login. Essentially the self registration only.

Thanks

Re: ISE 2.1 guest portal setup without login fields

Jason Kunst — Wed, 08 Mar 2017 14:51:38 GMT

Self registration with sponsor approval flow still requires the user to login to a portal

User registers

Sponsor approves

Credentials are sent to user

I am not sure what you're looking for?

We don't have a feature to allow the user to wait on a page for approval and be automatically authorized

Re: ISE 2.1 guest portal setup without login fields

Tim Baum — Wed, 08 Mar 2017 15:05:30 GMT

Not the way this customer is using it.

Re: ISE 2.1 guest portal setup without login fields

Tim Baum — Wed, 08 Mar 2017 15:08:30 GMT

I should add that they want to have guest register for an account on one SSID (open) then get sponsor approval. Then connect using that account on a wpa2-ent ssid. It all works but the guest portal page has that big login field in the middle we want to hide somehow, to be less confusing.

Re: ISE 2.1 guest portal setup without login fields

Jason Kunst — Wed, 08 Mar 2017 15:18:06 GMT

Ok that's good info!

how about just using the script that Charles shared to go directly to self registration?