topic Re: Backup Question - ISE in Network Access Control https://community.cisco.com/t5/network-access-control/backup-question-ise/m-p/3444977#M536701 <HTML><HEAD></HEAD><BODY><P>If you are reading the ISE 2.1 admin guide, we would need to update the doc.</P><P></P><P>Below show no option to perform application-only backup. The ADE-OS data include start-up configuration (ISE node IP address, route, etc.) and any associated files.</P><P><IMG alt="Screen Shot 2016-12-20 at 3.53.37 PM.png" class="image-1 jive-image" height="180" src="/legacyfs/online/fusion/103391_Screen Shot 2016-12-20 at 3.53.37 PM.png" style="height: 180.4699570815451px; width: 289px;" width="289" /></P><P></P><P>During restore, we do have options to exclude ADE-OS data such that the target host will retain its IP address and CLI password, etc.</P></BODY></HTML> Tue, 20 Dec 2016 23:58:41 GMT hslai 2016-12-20T23:58:41Z Backup Question - ISE https://community.cisco.com/t5/network-access-control/backup-question-ise/m-p/3444976#M536698 <HTML><HEAD></HEAD><BODY><P>Hi Team,</P><P></P><P>In the admin guide for GUI backup, the following is an option:</P><P></P><P>Check the Application-Only Backup, Excludes OS System Data check box to back up only the Cisco ISE application data. Uncheck this check box if you want to include the Cisco ADE operating system data in the backup as well.</P><P></P><P>Can you confirm what is included in either option? i.e. Application-Only Backup, Excludes OS System Data / Cisco ADE operating system data</P><P></P><P>Regards,</P><P>Anshul</P></BODY></HTML> Sat, 17 Dec 2016 00:12:48 GMT https://community.cisco.com/t5/network-access-control/backup-question-ise/m-p/3444976#M536698 ankaushi 2016-12-17T00:12:48Z Re: Backup Question - ISE https://community.cisco.com/t5/network-access-control/backup-question-ise/m-p/3444977#M536701 <HTML><HEAD></HEAD><BODY><P>If you are reading the ISE 2.1 admin guide, we would need to update the doc.</P><P></P><P>Below show no option to perform application-only backup. The ADE-OS data include start-up configuration (ISE node IP address, route, etc.) and any associated files.</P><P><IMG alt="Screen Shot 2016-12-20 at 3.53.37 PM.png" class="image-1 jive-image" height="180" src="/legacyfs/online/fusion/103391_Screen Shot 2016-12-20 at 3.53.37 PM.png" style="height: 180.4699570815451px; width: 289px;" width="289" /></P><P></P><P>During restore, we do have options to exclude ADE-OS data such that the target host will retain its IP address and CLI password, etc.</P></BODY></HTML> Tue, 20 Dec 2016 23:58:41 GMT https://community.cisco.com/t5/network-access-control/backup-question-ise/m-p/3444977#M536701 hslai 2016-12-20T23:58:41Z