topic Re: All configurable items for ISE2.1 in Network Access Control

All configurable items for ISE2.1

kharada — Thu, 18 Aug 2016 09:12:00 GMT

What should I do to check the complete list of configurable items and its default value for ISE 2.1?

It is glad if there is something like output of "show run all" in IOS.

Re: All configurable items for ISE2.1

Ping Zhou — Thu, 18 Aug 2016 14:48:19 GMT

With a fresh installed ISE, you can do Policy Export and use internet browser to view the XML file.

Re: All configurable items for ISE2.1

kharada — Fri, 19 Aug 2016 05:26:56 GMT

Thank you for a reply.

I tried it and got PolicyConfig.xml.

However it didn't contain full configurable items, but only a part of them.

I confirmed the output of CLI:"show run" in addition, but I couldn't get the complete list.

What should I do next?

Re: All configurable items for ISE2.1

Timothy Abbott — Fri, 19 Aug 2016 15:31:01 GMT

Hi,

We don't have a method for what you are trying to do. As stated, we have various policy export options but those don't list every possibly setting in the system. Most of the configuration options for the system are in the web GUI and unfortunately, there just isn't a method listing all the options.

Regards,

-Tim