topic Re: ISE Cluster in Network Access Control https://community.cisco.com/t5/network-access-control/ise-cluster/m-p/3575972#M538588 <HTML><HEAD></HEAD><BODY><P>Running policy services on the same node as the admin and monitoring is only supported in small frploymenfs</P><P></P><P>once you add external policy service notes then the deployment moves into a medium size model where you cannot run policy services on the same notes as administration and monitoring</P><P></P><P> This is clearly outlined in the following documentation on table one </P><P></P><P><A href="http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/installation_guide/b_ise_InstallationGuide20/Network_Deployments_in_Cisco_ISE.html" title="http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/installation_guide/b_ise_InstallationGuide20/Network_Deployments_in_Cisco_ISE.html">Cisco Identify Services Engine Hardware Installation Guide, Release 2.0 - Network Deployments in Cisco ISE [Support] - …</A></P></BODY></HTML> Wed, 15 Jun 2016 12:35:01 GMT Jason Kunst 2016-06-15T12:35:01Z ISE Cluster https://community.cisco.com/t5/network-access-control/ise-cluster/m-p/3575971#M538587 <HTML><HEAD></HEAD><BODY><P>Hi </P><P></P><P>Is it possible to have a cluster with 4 nodes where 2 nodes run all the 3 services (PAN /PSN &amp; M&amp;T) , while the other 2 runs only as PSN </P><P></P><P>Can this be done ?</P><P></P><P>Narayan</P></BODY></HTML> Wed, 15 Jun 2016 10:30:18 GMT https://community.cisco.com/t5/network-access-control/ise-cluster/m-p/3575971#M538587 Narayan Subramanian 2016-06-15T10:30:18Z Re: ISE Cluster https://community.cisco.com/t5/network-access-control/ise-cluster/m-p/3575972#M538588 <HTML><HEAD></HEAD><BODY><P>Running policy services on the same node as the admin and monitoring is only supported in small frploymenfs</P><P></P><P>once you add external policy service notes then the deployment moves into a medium size model where you cannot run policy services on the same notes as administration and monitoring</P><P></P><P> This is clearly outlined in the following documentation on table one </P><P></P><P><A href="http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/installation_guide/b_ise_InstallationGuide20/Network_Deployments_in_Cisco_ISE.html" title="http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/installation_guide/b_ise_InstallationGuide20/Network_Deployments_in_Cisco_ISE.html">Cisco Identify Services Engine Hardware Installation Guide, Release 2.0 - Network Deployments in Cisco ISE [Support] - …</A></P></BODY></HTML> Wed, 15 Jun 2016 12:35:01 GMT https://community.cisco.com/t5/network-access-control/ise-cluster/m-p/3575972#M538588 Jason Kunst 2016-06-15T12:35:01Z