topic use clear command in Network Access Control

Remove enable tacacs authentication

J2NoomSai_2 — Fri, 21 Feb 2020 18:21:59 GMT

How to remove enable tacacs authentication on 6509 CatOS? I tried to enter new pw but it ask for old pw which I don't know. So the easiest way is to remove enable tacacs. Thanks in advance.

Sai

Re: Remove enable tacacs authentication

Premdeep Banga — Tue, 26 Aug 2008 21:25:49 GMT

Try,

set authentication enable disable all

set authentication enable local enable primary

Good luck!

Regards,

Prem

Please rate if it helps!

Re: Remove enable tacacs authentication

J2NoomSai_2 — Tue, 26 Aug 2008 21:32:42 GMT

Hi Prem

It work. Another question is how to reset enable pw without knowing the old one?

Thanks

Sai

Re: Remove enable tacacs authentication

Premdeep Banga — Tue, 26 Aug 2008 22:03:55 GMT

hmmm, I think that would require assistance from some CatOS expert. As the only way I am aware of is, using the "set enablepass", which requires you to be aware of old password.

May be some kind of password recovery. I might have to look for that option, but dont have it top of my head at this moment =P

Regards,

Prem

Please rate if it helps!

use clear command

pradeep Kumar — Wed, 19 Jul 2017 02:53:04 GMT

use clear command

ex:- clear tacacs server 192.168.1.1

9 years after the original

Marvin Rhoads — Wed, 19 Jul 2017 03:09:26 GMT

9 years after the original post - I think they may have found out the answer already. 🙂