topic Re: ISE and VMWare VADP support in Network Access Control

ISE and VMWare VADP support

mmasarat — Tue, 19 Apr 2016 06:31:17 GMT

Hi,

Quick question: is it possible to use WMware VADP to backup ISE Guests (on a ISE virtual appliance)?

As far as I know we can only use ISE backup system, I couldn't find any reference to VADP.

Thanks much,

Marcello

Re: ISE and VMWare VADP support

Timothy Abbott — Tue, 19 Apr 2016 18:26:21 GMT

Hi,

The current method for backing up ISE nodes is to use the built-in backup utility. VMware VADP is not listed as a supported method because it has not been vetted by our QA teams.

Regards,

-Tim

Re: ISE and VMWare VADP support

mmasarat — Tue, 19 Apr 2016 22:24:41 GMT

Tim, hi,

I've some additional questions related to VMware:

- do the virtual appliances behave without service interruptions when DRS (Distributed Resource Scheduler) decides to relocate one of these servers to balance host performances?

- Are snapshots and Storage vMotioning also supported?

Based on the install guide vMotion is supported but not sure about the Storage as well.

Thanks for the quick answer,

Cheers,

Marcello

Re: ISE and VMWare VADP support

chrivand — Wed, 23 May 2018 06:25:17 GMT

Hi All,

I have found that currently vMotion is stated in the config guide as being supported. Is that correct?

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/install_guide/b_ise_InstallationGuide21/b_ise_InstallationGuide21_chapter_010.pdf

If so, what are the limitations and guidelines?

Thanks in advance!

Re: ISE and VMWare VADP support

Jason Kunst — Wed, 23 May 2018 14:20:43 GMT

see vMotion support for ISE