topic ISE compatibility with Autonomous AP in Network Access Control

ISE compatibility with Autonomous AP

Abhishek Pakrashi — Sun, 24 Apr 2016 09:42:50 GMT

Checked the ISE compatibility document

http://www.cisco.com/c/en/us/td/docs/security/ise/1-4/compatibility/ise_sdt.html

but there was no entry for ISE's compatibility with Autonomous APs

I am looking to verify if ISE 1.4 is compatibile with Autonomous APs(AIR-AP1131AG-S-K9 and AIR-CAP1602E-S-K9) doing dot1x/mab.

Re: ISE compatibility with Autonomous AP

Jason Kunst — Mon, 25 Apr 2016 13:35:02 GMT

Standard dot1x and MAB should work fine. basic authentication

You won't be able to do advanced flows that require COA (guest, posture, byod, MDM, etc as their is no URL redirection support either). Also you won't be able to switch flows without disconnecting the clients after a VLAN change requirement (profiling moves device from unknown to windows workstation for example)

https://supportforums.cisco.com/discussion/11541416/ise-deployment-wireless-infra-without-wlc-only-access-point-1240ag

Re: ISE compatibility with Autonomous AP

Abhishek Pakrashi — Mon, 25 Apr 2016 13:52:09 GMT

Thanks for the answer