topic Re: SMS Notifications using Twilio in Network Access Control

SMS Notifications using Twilio

ghalleen — Fri, 12 Feb 2016 09:34:55 GMT

Does anyone have a working configuration with ISE to send SMS messages using Twilio?

Re: SMS Notifications using Twilio

Richard Wakefield — Fri, 12 Feb 2016 16:17:10 GMT

I could use this also. Twilio has very specific requirements on how to POST the data, and there is very little documentation on how to make ISE match what they are expecting.

This post was perfect for clickatell, if I could get something like this for Twilio that would be great.

https://supportforums.cisco.com/document/12383241/ise-13-guest-setup-click-tell-international-sms-notifications

Re: SMS Notifications using Twilio

Timothy Abbott — Mon, 15 Feb 2016 19:08:57 GMT

Richard,

Using the guide you referenced for Clickatell, you should be able to recreate that for Twilio as well. They have a document on how to use their HTTP-Post parameters in their REST API. The URL I was able to find for this is below:

Twilio Cloud Communications - APIs for Voice, VoIP, and Text Messaging

Regards,

-Tim

Re: SMS Notifications using Twilio

Richard Wakefield — Mon, 15 Feb 2016 19:14:12 GMT

Clickatell uses an HTTP get, while Twillio wants a POST, so the formatting is different. And I'm not an HTML coder, so I'd really need to see the whole string cut/paste style to recreate it in ISE.

Re: SMS Notifications using Twilio

Timothy Abbott — Mon, 15 Feb 2016 19:18:43 GMT

ISE 2.0 supports HTTP POST. You'll see it after selecting "SMS HTTP API" when adding a new SMS Gateway Provider. I don't think you need to be an HTTP coder to do it, you just need to format the HTTP POST URL using Twilio's API variables.

Regards,

-Tim

Re: SMS Notifications using Twilio

Richard Wakefield — Mon, 15 Feb 2016 19:25:08 GMT

Running ISE 1.4, and see TAC case: 637964857. Nobody seems to know the right format.

Data (Url encoded portion):

To=1$mobilenumber$&From=+1<number deleted>&Body=$message$

Is this right? Doesn't work. Should it be To=$mobilenumber$ (without the one), is that right? Doesn't seem to be. Is it missing the markers for the Username password? Seems like it, what should those look like in ISE?

Our HTML guys says:

The ISE is not supplying the values from the "HTTPS Username" and "HTTPS password" fields in the HTTP POST request (as can be seen in the tcpdump). These should be passed in a standard HTTP "Authorization" header (HTTP BASIC auth).

The contents of the "Data (Url encoded portion)" field are, in fact, not being URL-encoded at all. The tcpdump shows the raw '+' character and raw spaces being passed.

So you tell me, you don't think an HTML person is required for this task?

Cut and past what the URL encoded portion should be, exactly, and I'll try it.

Re: SMS Notifications using Twilio

Jason Kunst — Mon, 15 Feb 2016 21:18:55 GMT

if you're already working with tac I would recommend asking they escalate to see if they can get it to work with developers, it might be a request for enhancement if it doesn't work and this way they can capture the required info to make it work

Re: SMS Notifications using Twilio

Richard Wakefield — Mon, 15 Feb 2016 21:22:04 GMT

Already done. Was using the forum as another route to see if somebody in the community figured this syntax out already. Some of the other services (like Clickatell) are better documented...

Re: SMS Notifications using Twilio

Jason Kunst — Tue, 23 Feb 2016 09:39:14 GMT

This vendor flow using http posts is not currently supported and will require customer to open enhancement to track, disregard prior defect that was listed

Re: SMS Notifications using Twilio

Jacob Snyder — Thu, 15 Dec 2016 21:06:51 GMT

Running into these challenges with Twilio as well. What's the best way to show that this is a highly requested feature from customers. Twilio support is baked into Meraki already and customers like it.

Re: SMS Notifications using Twilio

Jason Kunst — Thu, 15 Dec 2016 21:13:04 GMT

please open a tac case and escalate where needed, I think they might have a solution now but don't know if its documented

Re: SMS Notifications using Twilio

Jason Kunst — Thu, 15 Dec 2016 21:13:15 GMT

have them include me as well

Re: SMS Notifications using Twilio

Jeff Okragly — Wed, 01 Mar 2017 18:14:15 GMT

Has anything come of this? I am looking for a solution as well. I actually opened a TAC about 2 years ago on this and they said that it would be fixed in 2.0, which it wasn't then they said 2.2. I even requested a feature enhancement. Anybody have any success with this? Clickatell is easy to configure but doesn't offer global solutions...

Re: SMS Notifications using Twilio

Jason Kunst — Wed, 01 Mar 2017 18:19:05 GMT

We are using Click-a-tell globally, not sure of the problem? We have some customers using twilio with ISE 2.0 patch 3

Apparently the trick with Twilio was, you had to include the FROM phone number in BOTH the URL and the encoded portion.

Re: SMS Notifications using Twilio

Jeff Okragly — Wed, 01 Mar 2017 19:35:35 GMT

Thanks, I have tested but it failed.

What is the Username and Password that should be used? Is it the same creds to login to the twilio site or should we use the Acct Sid and Auth Token?

Re: SMS Notifications using Twilio

Jason Kunst — Wed, 01 Mar 2017 19:40:07 GMT

I don’t have a setup I was just passed this info and don’t have a further write-up, trying to work with someone that has a setup to get better notes.

This is a question for Twilio but would think its Acct Sid and Auth Token

I will see if someone with this setup can comment as well

Re: SMS Notifications using Twilio

Jeff Okragly — Wed, 01 Mar 2017 19:43:43 GMT

Thank you. I tried both ways. When I have the site username and password entered in ISE the guest portal says the message was sent but I never recieve it. Wonder what the 2B in the begining of the phone number is? THought maybe that was the + sign.

If I ender the Account Sid and Auth Token and test the guest portal says SMS Failed to send...

Look forward to hearing back from you.

Re: SMS Notifications using Twilio

Jason Kunst — Wed, 01 Mar 2017 19:46:07 GMT

If this is urgent please open a tac case, will try to get some better info on this for you

Re: SMS Notifications using Twilio

Rahul Govindan — Thu, 02 Mar 2017 16:09:20 GMT

I just tried this Jason and this does not work.My Post DATA is:

From=%2B17329630402&To=%2B1$mobilenumber$&Body=$message$

and URL is:

https://api.twilio.com/2010-04-01/Accounts/<Account-id>/Messages.json?From=%2B17329630402

I have all the other auth parameters correct. I can get this to work with Postman without the From field in the URL and the same POST data.

I see the screenshot you added has no To and Body paramters, which is not what Twilio documentation says. Can you paste a working Post data field?

Re: SMS Notifications using Twilio

Rahul Govindan — Thu, 02 Mar 2017 16:10:56 GMT

Username and password is account sid and auth token. %2B is + sign for the number. I can get this to work using a external POST client, not ISE though.