topic Re: ISE guest portal for use on their Meraki network in Network Access Control

ISE guest portal for use on their Meraki network

lcammara — Thu, 25 Feb 2016 13:59:47 GMT

We have a customer that is considering ISE guest portal for use on their Meraki network.

Specifically self-registered with approver email

Re: ISE guest portal for use on their Meraki network

Jason Kunst — Thu, 25 Feb 2016 14:16:22 GMT

As meraki doesn't support ISE CWA portals (redirection of their clients to the ISE guest portal) then this is not something likely easy to do, requires custom flow

customer would need to embed a link to the ISE self-reg (don't have an account page) on the meraki LWA page

the flow would be

1. User connects to meraki guest ssid and redirected to their LWA portal

2. User clicks on the don't have an account that launches to ise portal (perhaps in a new Window)

3. User creates an account on ISE and sponsor is notified to approve

4. User directed to close this page or provides link back to meraki redirect

5. Sponsor approves and user logs in after they receive credentials

http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-86-Integrating_Meraki_Networks.pdf

Re: ISE guest portal for use on their Meraki network

colo — Thu, 24 Mar 2016 05:39:17 GMT

Reach out to your Meraki rep and ask about how to use Cisco ISE CWA with Meraki.

Re: ISE guest portal for use on their Meraki network

Jason Kunst — Thu, 24 Mar 2016 11:11:38 GMT

THis was already answered correctly with a link to the how to doc