topic Re: ISE MyDevices Portal customization (remove the column for pending/register state) in Network Access Control

ISE MyDevices Portal customization (remove the column for pending/register state)

anvolkov — Tue, 23 Feb 2016 08:44:14 GMT

This is for ISE 1.3+

do you know if it's possible to remove the Device registration status from the MyDevices portal (ISE 1.4)? By default the status is displayed (Registered/Pending). My Customer wants to get rid of this column in general:

Re: ISE 1.4 MyDevices Portal customization

Jason Kunst — Thu, 25 Feb 2016 13:03:24 GMT

Check this out, reference my how to on web portal customization to get used to JavaScript requirements

http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-43_ISE_Web_Portal_Customization_Options.pdf

THis this should be put under optional content 2 for manage devices page

$(document).ready(function() {

setTimeout(function(){

var checkbox = $('.ui-checkbox:nth-child(4) [data-icon="checkbox-off"]');

if(checkbox.length == 0) {

$('[for="col-4"]').click()

}

}, 1200);

});

</script>

Re: ISE 1.4 MyDevices Portal customization

anvolkov — Fri, 26 Feb 2016 08:28:56 GMT

Jason,

Thanks a lot for the script. I tested it in my lab, for the default MyDevices portal it works perfectly. But unfortunately it didn't work for the portal migrated from 1.2 (and the Customer is using this one).

Do you have any suggestions what might be wrong with it? I have restored the Customer's config in my lab, if you need an access to their ISE I can give you it.

Default:

Migrated from 1.2/Customized by the Customer:

Re: ISE 1.4 MyDevices Portal customization

Eric Pineda — Wed, 18 May 2016 18:52:22 GMT

Sorry for hijacking this post, but I figured my question belongs here.

The script works great for the page that shows all devices listed, but when you click on one of them it shows the device status in another page.

Is it possible to also hide the status when viewing the device details?

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Fri, 20 May 2016 19:02:25 GMT

Check this out put it on the Manage Device page under Instructional text:

jQuery(document).on("pageshow","#page-manage-device",function(){

jQuery("#page-manage-device .cisco-ise-table-row:first").hide();

});

</script>

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jeremy Brooks — Tue, 14 Feb 2017 15:29:34 GMT

Does anyone know how to hide the number of registered devices on the "My Devices" page of the Portal? I know how to remove "Number of registered devices:" , but i am having javascript trouble on hiding the number "0/100". See below:

Any help would be great.

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Thu, 10 Aug 2017 20:24:03 GMT

did you ever get this working? sorry it was so long ago

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

sfortin — Thu, 08 Feb 2018 19:58:20 GMT

Has this script changed for ISE 2.3; more specifically with ISE 2.3 portals built with ISE PB? The Manage Devices page does not have an Optional Text 2 entry box

All of our non-dot1x devices students enter show up as Pending state and generate tickets.

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Thu, 08 Feb 2018 20:17:54 GMT

did you try the instructional text? It will work under any box

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

sfortin — Thu, 08 Feb 2018 20:36:44 GMT

I've tried this script in all 3 boxes of the My Devices page- the one that was referred to in the original post.

The Pending status is still shown..

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Thu, 08 Feb 2018 20:39:49 GMT

is any other scripting working for you? did you allow javascript under the admin settings? mentioned in this guide

How To: ISE Web Portal Customization Options | Cisco Communities

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Thu, 08 Feb 2018 20:40:28 GMT

i see a problem, please look at the guide i sent, looks like you're trying to insert script on the text page and not under the toggle html/javascript page

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

sfortin — Thu, 08 Feb 2018 21:32:07 GMT

That solved the My Devices page- you were correct the script goes under Optional Content 2 using the toggle HTML feature.

The Manage Device page still shows the Pending Status with the secondary script added to the Manage Device page and the Edit Device page:

And the configuration page:

HTML / Java configuration is enabled under Settings > Portal Customization

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Serhii Pustovit — Fri, 09 Feb 2018 10:52:09 GMT

Hi Scott,

Could you please also try this one script, which will hide row with timeout 2 seconds?

setTimeout(function(){

$("#page-manage-device .cisco-ise-table-row:first").hide();

}, 2000);

</script>

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

wackerk24 — Mon, 17 Sep 2018 19:56:21 GMT

Hi Jason,

I have a customer running ISE 2.2 Patch 9 and we are trying to remove the status on the My Device portal. I've tried the scripts posted here for the My Device and Managed Device but the status is still showing up. I did make sure to toggle html/java and we have java enabled globally but still no luck.

The other odd thing is after 10-15 minutes if you go back to the Portal Customization the scripts are no longer showing up. It's as if they were deleted??

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Mon, 17 Sep 2018 20:00:41 GMT

please open a new thread as its not directly related to this.

Also would recommend working with the TAC if something is working then stops working likely a bug

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

wackerk24 — Mon, 17 Sep 2018 20:04:22 GMT

It's directly related to this thread, the scripts aren't working for me. We have never gotten them to work. I was just providing the version for color.

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Mon, 17 Sep 2018 20:07:41 GMT

You said they disappeared which is a tac issue, please open a new thread instead of back and forth on this

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Marc Aemmer — Fri, 28 Sep 2018 12:55:14 GMT

How can the Column "Status" be hidden on the "My Devices" Site?

Re: ISE MyDevices Portal customization (remove the column for pending/register state)

Jason Kunst — Fri, 28 Sep 2018 19:10:11 GMT

That's what this thread is for. remove column for pending/ register "state"