Newb ISE/WLC question

gciarrocchi — Mon, 11 Mar 2019 08:49:03 GMT

Career Sys Admin here trying to learn Cisco/WLC on the fly.

Please tell me if this is possible, and be kind.... I'm a learnin... 🙂

I have a network with multiple AP's in different Groups connected to Two WLC's.

As of now, I have 4 WLANS. My goal is to get down to 2. But in order to do so, I have to be able to provide the same accomidations.

I need to be able to have one SSID that uses 802.1x, (prodnet)where end users connect with their AD credentials. I need a second guest network (guestnet)that uses a captive portal.

The first network works fine and users can connect, use their devices, etc.

Problem is, I would like to have some devices automatically white listed via Identity group (Mac address).

Is this possible? Remember, newb here. be gentle.. 🙂

Is this possible?

The goal is to make it simple for end users.

Re: Newb ISE/WLC question

thomas — Fri, 31 Aug 2018 19:29:54 GMT

We call this "MAC Authentication Bypass" or MAB since you are just the MAC address and not doing real authentication with a password.

Please see the thread Wireless MAB on ISE 1.2.

Yes, it's an older version of ISE but the concepts are the same.

topic Re: Newb ISE/WLC question in Network Access Control

Newb ISE/WLC question

Re: Newb ISE/WLC question