Add ISE server in Prime v3.4 - wrong username or password

dal — Mon, 11 Mar 2019 08:52:33 GMT

Hi.

I'm trying to add my ISE servers to Prime Infrastructure v.3.4, but it says I have the wrong username or password.

Admin login to ISE is set to use AD.
I tried my own username that I know works, but it says wrong username or password.
I also tried to create an internal Admin User in ISE, but same error

I run ISE v3.4 with patch 5, and Prime Infrastructure v3.4 with PI 3.4.1 patch

Any ideas?

Thanks.

Re: Add ISE server in Prime v3.4 - wrong username or password

Jason Kunst — Fri, 30 Nov 2018 18:49:04 GMT

Not sure if its an issue but doesn’t show validated here. They tested 3.1. I would recommend a tac case if its urgent. Perhaps others have tried this as well
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#pirelease

topic Add ISE server in Prime v3.4 - wrong username or password in Network Access Control

Add ISE server in Prime v3.4 - wrong username or password

Re: Add ISE server in Prime v3.4 - wrong username or password