topic Re: Blue coat proxy integration with ISE 2.4 in Network Access Control

Blue coat proxy integration with ISE 2.4

ranjit123 — Mon, 11 Mar 2019 08:50:31 GMT

Hello All,

We need to integrate Bluecoat proxy with ISE 2.4 for radius authentication and authorization has any one done the same can some one explain me the flow and what attributes should i match in ISE for the same

Re: Blue coat proxy integration with ISE 2.4

Aravind Ravichandran — Wed, 10 Oct 2018 09:44:35 GMT

Hi Ranjit,

Please try this out.

Add Bluecoat Proxy under Radius Vendor in ISE Dictionary with vendor id 14501

Under dictionary attribute add 2 new attribute with

Attribute Name : Blue-Coat-Authorization

Data Type: UINT32

Direction: Both

ID: 2

Another attribute with Attribute Name: Blue-Coat-Group

Data Type: UINT32

Direction: Both

ID: 1

Under Authorization profile,use network device profile as Bluecoat,then in Advance attribute call the above 2 attributes as:

Blue-Coat-Authorization = 2
Blue-Coat-Group = 2

https://community.cisco.com/t5/identity-services-engine-ise/bluecoat-proxy-ssg-300-25-administration-access-using-ise/m-p/3715526/highlight/true

Re: Blue coat proxy integration with ISE 2.4

ranjit123 — Wed, 10 Oct 2018 09:58:47 GMT

Hello Thanks a lot for reply

where to match shell privileges..

Re: Blue coat proxy integration with ISE 2.4

Aravind Ravichandran — Wed, 10 Oct 2018 11:41:41 GMT

Privilege levels will be configured under authorization profile for Radius.