topic Re: License information in Network Access Control

License information

Capricorn — Fri, 21 Feb 2020 18:47:05 GMT

Hi!

We have two ISE-3315-K9 running in two way deployment. I beleive that we have Plus license but I dont see Posture option under Administration -> settings.

I can see in license option the following lines.

Base 500 Permanent Permanent
Wired 500 Permanent Permanent

Plus 250 Term 04-Feb-2019 (300 days remaining)

Thanks

Re: License information

Ben Walters — Thu, 01 Mar 2018 20:35:35 GMT

Yes it sounds like you have Plus licenses installed, if you are looking to enable Profiling on the nodes though you will find that option under a different section.

Go to Administration > Deployment > Choose a node from the list

Here you should see the option to enable the profiling service on the nodes in your environment under general settings and there will also be a specific section for profiling configuration.

Re: License information

Capricorn — Thu, 01 Mar 2018 20:40:56 GMT

I have the option enable. See the attached file.

Re: License information

Jatin Katyal — Thu, 01 Mar 2018 20:49:38 GMT

Little more info, since you have 300 days remaining on plus license, that means you can configure profiling as Ben Walters recommended. In some cases, I have seen Advanced License Eval ( 0 days) then the option for profiling will be grayed out.

I see your point, you don't have the profiler option inside administration > settings. Can you check inside work centers > profiler > settings.

Re: License information

Ben Walters — Thu, 01 Mar 2018 20:47:52 GMT

Profiling is enabled for your node then, what are you trying to find, specific profiling settings?

Re: License information

Capricorn — Thu, 01 Mar 2018 20:56:13 GMT

opss. I was talking about Posture. Total mixed it up.

I dont see Posture folder under Adminitration -> settings

I can see that it requires a Advance license. so does Advance mean plus + apex license?

Re: License information

Ben Walters — Thu, 01 Mar 2018 20:58:55 GMT

That is correct, Posture requires Apex licenses.