https://community.cisco.com/t5/network-access-control/radius-aaa-authentication-enable-password/m-p/3909197#M547784 <P>ello everyone,</P><P>&nbsp;</P><P>I run 15.5 IOS on various routers and I'm looking for the statements to accomplish this:</P><P>&nbsp;</P><P>-authenticate via aaa radius then use local database if radius is down (this works: aaa authentication login default group radius local)</P><P>-do not require an enable password if radius is up (meaning go straight into the enable mode after authentication succeeds)</P><P>-however if radius is down users must login using their username password defined in router local database AND an enable password.</P><P>my username as priv level 15 defined in router local database.</P><P>&nbsp;</P><P>Thanks!</P> Fri, 21 Feb 2020 19:08:52 GMT andromeda 2020-02-21T19:08:52Z https://community.cisco.com/t5/network-access-control/radius-aaa-authentication-enable-password/m-p/3909197#M547784 <P>ello everyone,</P><P>&nbsp;</P><P>I run 15.5 IOS on various routers and I'm looking for the statements to accomplish this:</P><P>&nbsp;</P><P>-authenticate via aaa radius then use local database if radius is down (this works: aaa authentication login default group radius local)</P><P>-do not require an enable password if radius is up (meaning go straight into the enable mode after authentication succeeds)</P><P>-however if radius is down users must login using their username password defined in router local database AND an enable password.</P><P>my username as priv level 15 defined in router local database.</P><P>&nbsp;</P><P>Thanks!</P> Fri, 21 Feb 2020 19:08:52 GMT https://community.cisco.com/t5/network-access-control/radius-aaa-authentication-enable-password/m-p/3909197#M547784 andromeda 2020-02-21T19:08:52Z