https://community.cisco.com/t5/network-access-control/ise-compliance-status/m-p/3413233#M547989 <P>Hi,</P> <P>&nbsp;</P> <P>I have deployed ISE and we are using compliance check. all the windwos computers are passing complaice, but on the compliance dashlet i have noticed it only shows around 13% compliance.</P> <P>&nbsp;</P> <P>i check and i saw that devices like printers and other that are connecting to the netowrk with fingerprinting or dot1x (but have no complaice checks ) are counting as complaice unkown.&nbsp;</P> <P>&nbsp;</P> <P>is there a way to fix it?</P> <P>&nbsp;</P> <P>Thank you,</P> <P>Snir</P> Fri, 21 Feb 2020 19:00:38 GMT snir_orlanczyk 2020-02-21T19:00:38Z https://community.cisco.com/t5/network-access-control/ise-compliance-status/m-p/3413233#M547989 <P>Hi,</P> <P>&nbsp;</P> <P>I have deployed ISE and we are using compliance check. all the windwos computers are passing complaice, but on the compliance dashlet i have noticed it only shows around 13% compliance.</P> <P>&nbsp;</P> <P>i check and i saw that devices like printers and other that are connecting to the netowrk with fingerprinting or dot1x (but have no complaice checks ) are counting as complaice unkown.&nbsp;</P> <P>&nbsp;</P> <P>is there a way to fix it?</P> <P>&nbsp;</P> <P>Thank you,</P> <P>Snir</P> Fri, 21 Feb 2020 19:00:38 GMT https://community.cisco.com/t5/network-access-control/ise-compliance-status/m-p/3413233#M547989 snir_orlanczyk 2020-02-21T19:00:38Z