topic Re: Device Admin Internal Groups are not available in Network Access Control

Device Admin Internal Groups are not available

kai.onken — Fri, 21 Feb 2020 18:59:14 GMT

Good Moring,

After I added successfully some User Identity Groups by using "Work Centers -> Device Administration", I added some Local Identities to those Groups. The Policy Elements have also been added.

When I now try to add "Device Admin Policy Sets" happens this. I add a new Policy Set, added a policy name, added as an condition the locations of the devices and selected "Default Device Admin" and saved the policy set.

After Saving I pressed View button ">", opend Authentication Policy and set the Default value to "Internal Users" and save the Policy Set successfully.

Then I opend the Authorization Policy Tab, defined a rule name, selected my command set and shell profiles. Up to this point everything works fine.

Now my Problem starts: When I press "+" to add a new condition, normally I should be able to select my "User Identity Groups", I created before. But no "User Identity Groups" groups are vailable. But why:

ISE Version: 2.3

AD Join: Yes, Windows Server 2012 R2

Licence: Device Administration, Endpoint

Many thanks and kind regards

Kai

Re: Device Admin Internal Groups are not available

Marvin Rhoads — Sun, 24 Jun 2018 14:13:27 GMT

What patch level are you running? There were several bugs in ISE 2.3 (unpatched) that relate to Policy Studio. Most notably for your case I'd suspect:

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvf87440 (fixed in Patch 2).

In general I recommend 2.4 (currently at patch 1) over 2.3 since 2.4 will be a long term support release.

Re: Device Admin Internal Groups are not available

kai.onken — Wed, 11 Jul 2018 11:56:20 GMT

Thanks, for the tip. This was the solution on one side. The other point I forgot, was that on the left side, when you "build" a compound conditon, you can used previous save conditions and I was wondering, why I can't see here the conditions I've used. I haven't saved them for future use.

Thanks and kind regards

Kai

Re: Device Admin Internal Groups are not available

Marvin Rhoads — Thu, 12 Jul 2018 03:17:56 GMT

@kai.onken thanks for the feedback and the rating.