Attributes in CoA message to virtual WLC

guyeshet — Mon, 11 Mar 2019 05:52:48 GMT

Hey guys,

We're running a POC with a Prime Cisco Access Registrar as RADIUS, connected to a vWLC version 8.1.

I managed to configure PoD message between the RADIUS and the vWLC, which works absolutely fine.

My problem is with CoA message. I couldn't find anywhere a document describing which attributes should be sent there, the only documents I found have to do with IOS.

If I send a message with these attributes I get a error from the WLC of "Missing Attributes"

User-Name
NAS-IP-Address
NAS-Port
Framed-IP-Address
Calling-Station-Id
NAS-Identifier
Acct-Session-Id

And once I try adding Cisco's attributes:

Cisco-AVPair "subscriber:command=reauthenticate"
Cisco-AVPair "subscriber:reauthenticate-type=last" APPEND
Cisco-AVPair "audit-session-id=f3c2505200000036b1699b55"

I get timeout error and the WLC doesn't return anything.

I would really appreciate if anyone could help me understand what parameters should really be sent in order to have the CoA working.

Thanks!

Hi, I am trying to configure

alexey.murkaev — Fri, 17 Mar 2017 10:44:29 GMT

Hi, I am trying to configure CPAR as a RADIUS server for vWLC. Could you please share configuration with us?

topic Hi, I am trying to configure in Network Access Control

Attributes in CoA message to virtual WLC

Hi, I am trying to configure