topic Re: NAM deployment in Network Access Control

NAM deployment

adamgibs7 — Fri, 21 Feb 2020 18:55:15 GMT

Dears,

I want to deploy anyconenct NAM on a entire corporate by a customized profile that i created in one of the test machine by the profile editor, if i want to deploy a default profile of wired i would have just pushed through group policy it is not an issue ,, how i can achieve by a customized nam profile which is working for me in the test machine.

thanks

Re: NAM deployment

Ben Walters — Fri, 04 May 2018 12:14:56 GMT

Are you deploying the NAM client or just the profile?

If it is just the profile you need to deploy you should be able to easily deploy it through group policy.

You would just have to create the NAM profile you want, save it as configuration.xml and deploy it to the NAM system folder located in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\system if you used the default location for installation.

Re: NAM deployment

adamgibs7 — Fri, 04 May 2018 18:23:46 GMT

thanks

so just to confirm once more ,, It will be a 2 steps job as below:

deploy NAM module to corporate users by group policy or any other third party sources.

then deploy the configuration.xml file in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\system through group policy or through any third party sources

Thanks

Re: NAM deployment

Ben Walters — Fri, 04 May 2018 19:19:58 GMT

Correct, it is quite easy to deploy configuration for NAM, the single XML can have all your wired/wireless networks configured for your users.