https://community.cisco.com/t5/network-access-control/dial-plan-for-ph/m-p/3379171#M549010 <P>This would be better in a Telephony section of the forum.&nbsp; This is more for ACS / ISE type products.</P> Mon, 07 May 2018 09:03:35 GMT RichardAtkin 2018-05-07T09:03:35Z https://community.cisco.com/t5/network-access-control/dial-plan-for-ph/m-p/3377179#M549008 <P>Hi All,</P> <P>We have cucm &amp; cisco gateway. I created a displan for our Philippines offie. So when I use 8.! no issue i can dial local landline/mobilde/ndd/idd.I need segregation for the dial plan since some users need FAC to controls the calls.Below are my dial plan but IDD dial plan doesn't work when I add it and dial international number giving cannot be completed as dial seems like it hittings my NDD dial. Normal IDD call from PH dey dial 00+country code+phone number.&nbsp;Please help me with the correct dial plan for from PH. Thanks!</P> <P>&nbsp;</P> <P>8.XXXXXXX= landline ok<BR />8.09XXXXXXXXX=mobile ok<BR />8.0XXXXXXXXX=ndd ok<BR />8.00!= idd not working</P> Fri, 21 Feb 2020 18:55:06 GMT https://community.cisco.com/t5/network-access-control/dial-plan-for-ph/m-p/3377179#M549008 marco.escultura 2020-02-21T18:55:06Z https://community.cisco.com/t5/network-access-control/dial-plan-for-ph/m-p/3379171#M549010 <P>This would be better in a Telephony section of the forum.&nbsp; This is more for ACS / ISE type products.</P> Mon, 07 May 2018 09:03:35 GMT https://community.cisco.com/t5/network-access-control/dial-plan-for-ph/m-p/3379171#M549010 RichardAtkin 2018-05-07T09:03:35Z