https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3373556#M549184 <P>Or if that doesn't work, is there any logic to which software is on what clients, like Windows 7 uses one and Windows 10 uses another?&nbsp; If so, you can filter based on OS.</P> Thu, 26 Apr 2018 09:19:46 GMT RichardAtkin 2018-04-26T09:19:46Z https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3371041#M549177 <P>Hi,</P> <P>&nbsp;</P> <P>We have ISE 2.0 and configured posture policy for two Antivirus. We have SEP versions 14 and 12.1.</P> <P>However, when we run the policy, Anyconnect checks both AV.&nbsp;</P> <P>&nbsp;</P> <P>Is there an option for Posture Policy to use OR not AND for the Requirements?&nbsp;</P> <P>&nbsp;</P> <P>Thank you for your help in advance!</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>Regards,</P> <P>Mady</P> <P>&nbsp;</P> Fri, 21 Feb 2020 18:54:12 GMT https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3371041#M549177 Mady 2020-02-21T18:54:12Z https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3371052#M549180 <P>Hi,</P> <P>&nbsp;</P> <P>Have you tried using a compound policy condition using both posture conditions? (SEP 12/14)</P> <P><BR />Thanks,</P> <P>Octavian</P> Mon, 23 Apr 2018 11:52:07 GMT https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3371052#M549180 Octavian Szolga 2018-04-23T11:52:07Z https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3373556#M549184 <P>Or if that doesn't work, is there any logic to which software is on what clients, like Windows 7 uses one and Windows 10 uses another?&nbsp; If so, you can filter based on OS.</P> Thu, 26 Apr 2018 09:19:46 GMT https://community.cisco.com/t5/network-access-control/posture-policy-with-two-requirements/m-p/3373556#M549184 RichardAtkin 2018-04-26T09:19:46Z