topic Re: ACS Migration Tool - Policy Groups elements cannot be migrated in Network Access Control

ACS Migration Tool - Policy Groups elements cannot be migrated

Daniel Stefani — Fri, 21 Feb 2020 18:45:01 GMT

Hello,

I am migration from ACS 5.5 to ISE 2.2 and I am getting error exporting Access Policies.

In policy gap report I have this messages:

=======================================================================
RADIUS
=======================================================================

Rule: Rule_Radius
Description: Enabled SSP rule 'Rule_Radius' points on a service that is not a network
access service. This is not supported by ISE
-----------------------------------------------------------------------

=======================================================================
TACACS
=======================================================================

Rule: Rule_Tacacs
Description: Enabled SSP rule 'Rule_Tacacs' points on a service that is not a network
access service. This is not supported by ISE
-----------------------------------------------------------------------

=======================================================================

Summary:
*Service Selection Policy : Unsupported
*Authentication Policy : Supported
*Authorization Policy : Supported

Could you help me ?

Best Regards,

Daniel Stefani

Could you help me?

Re: ACS Migration Tool - Policy Groups elements cannot be migrated

csawest.dc — Mon, 23 Apr 2018 11:09:37 GMT

I am migrating cisco acs 5.8 to ISE 2.2 using migration tool.

My all objects gets migrated but only access policy is not getting migrating.

In policy gap report it is showing that Authorization policy is unsupported.

What would be the issue?

Can you please suggest here...

Regards,

Ravin L

Re: ACS Migration Tool - Policy Groups elements cannot be migrated

Daniel Stefani — Mon, 23 Apr 2018 13:10:30 GMT

Hello Ravin,

Are you getting same error as me? If yes, Are you trying export Access Policy object separately from others objects?

If this is the only error you are getting, so you need export all objects together.

Best Regards,

Daniel Stefani

Re: ACS Migration Tool - Policy Groups elements cannot be migrated

csawest.dc — Mon, 23 Apr 2018 14:34:43 GMT

Hi Daniel,

I have attached policy gap report.

Re: ACS Migration Tool - Policy Groups elements cannot be migrated

Daniel Stefani — Mon, 23 Apr 2018 14:46:09 GMT

Hi Ravin L,

So, Export was successful right?

Could you share informations about 7 errors in Dictionaries and 3 errors in Policy Elements?

Import Reports too, please.

Best Regards,

Daniel Stefani