https://community.cisco.com/t5/network-access-control/login-to-secondary-ise-node-using-as/m-p/3296535#M550941 <P>Is that node joined to the AD? I suspect not.&nbsp; Each node should be joined to the AD for this to work.</P> <P>In the beginning I used to wonder why my MnT nodes need to join the AD.&nbsp; The answer is simple - for Admin access.&nbsp; For PSN it's obviously also needed for Policy services etc.</P> Fri, 15 Dec 2017 00:54:39 GMT Arne Bier 2017-12-15T00:54:39Z https://community.cisco.com/t5/network-access-control/login-to-secondary-ise-node-using-as/m-p/3232070#M550939 <P>Hi ,&nbsp;</P> <P>&nbsp;</P> <P>we have an ise deployment 1 Admin + 4 PSN&nbsp;</P> <P>currently I have added a second admin node to the cluster&nbsp;</P> <P>all showing good and green but I cannot login to the secondary admin node GUI using my AD account , while I can for all other nodes&nbsp;</P> <P>not sure what I have missed ? ISE 2.2 , any thoughts guys ?</P> <P>much appreciated.</P> Fri, 21 Feb 2020 18:41:28 GMT https://community.cisco.com/t5/network-access-control/login-to-secondary-ise-node-using-as/m-p/3232070#M550939 aous.salloum 2020-02-21T18:41:28Z https://community.cisco.com/t5/network-access-control/login-to-secondary-ise-node-using-as/m-p/3296535#M550941 <P>Is that node joined to the AD? I suspect not.&nbsp; Each node should be joined to the AD for this to work.</P> <P>In the beginning I used to wonder why my MnT nodes need to join the AD.&nbsp; The answer is simple - for Admin access.&nbsp; For PSN it's obviously also needed for Policy services etc.</P> Fri, 15 Dec 2017 00:54:39 GMT https://community.cisco.com/t5/network-access-control/login-to-secondary-ise-node-using-as/m-p/3296535#M550941 Arne Bier 2017-12-15T00:54:39Z