topic Re: WIFI 802.1x Anyconnect Posture with ISE scans for compliance every 20seconds. Wired 802.1x is fine. in Network Access Control https://community.cisco.com/t5/network-access-control/wifi-802-1x-anyconnect-posture-with-ise-scans-for-compliance/m-p/3216769#M551332 <P>Appears to be not what I thought.</P> Wed, 15 Nov 2017 06:13:43 GMT Jarvis IT 2017-11-15T06:13:43Z WIFI 802.1x Anyconnect Posture with ISE scans for compliance every 20seconds. Wired 802.1x is fine. https://community.cisco.com/t5/network-access-control/wifi-802-1x-anyconnect-posture-with-ise-scans-for-compliance/m-p/3216073#M551331 <P>Hi,</P> <P>Not sure if anyone has seen issues with Anyconnect Posture on a WiFi 802.1x network but I have been having a few issues. Most of my client&nbsp;client are having issues where they scan for posture every 20 seconds temporarily&nbsp;causing a "Transmit Failure. General Failure" on&nbsp;a continuous ping.</P> <P>&nbsp;</P> <P>My Environment is as follows:</P> <P>Windows 10 64 Bit haven't tried much else yet.</P> <P>ISE 2.3 Patch 1</P> <P>Virtual WLC&nbsp;8.3.130.0</P> <P>Anyconnect 4.5.02036</P> <P>&nbsp;</P> <P>This is what I see in the Anyconnect scanning log:</P> <P>4:26:57 PM Searching for policy server.<BR /> 4:26:57 PM Limited or no connectivity.<BR /> 4:26:58 PM Searching for policy server.<BR /> 4:26:58 PM Checking for product updates...<BR /> 4:26:58 PM The AnyConnect Downloader is performing update checks...<BR /> 4:26:58 PM Checking for profile updates...<BR /> 4:26:58 PM Checking for product updates...<BR /> 4:26:58 PM Checking for customization updates...<BR /> 4:26:58 PM Performing any required updates...<BR /> 4:26:58 PM The AnyConnect Downloader updates have been completed.<BR /> 4:26:58 PM Update complete.<BR /> 4:26:58 PM Compliant.<BR /> 4:27:19 PM Searching for policy server.<BR /> 4:27:19 PM Limited or no connectivity.<BR /> 4:27:20 PM Searching for policy server.<BR /> 4:27:20 PM Checking for product updates...<BR /> 4:27:20 PM The AnyConnect Downloader is performing update checks...<BR /> 4:27:20 PM Checking for profile updates...<BR /> 4:27:20 PM Checking for product updates...<BR /> 4:27:20 PM Checking for customization updates...<BR /> 4:27:20 PM Performing any required updates...<BR /> 4:27:20 PM The AnyConnect Downloader updates have been completed.<BR /> 4:27:20 PM Update complete.<BR /> 4:27:21 PM Compliant.</P> <P>&nbsp;</P> <P>Anyway I am continuing the battle, I may have to go back to my TAC case I closed after my intial testing client started working. If anyone has any suggestions feel free to throw them at me.</P> <P>&nbsp;</P> <P>Cheers</P> Fri, 21 Feb 2020 18:38:55 GMT https://community.cisco.com/t5/network-access-control/wifi-802-1x-anyconnect-posture-with-ise-scans-for-compliance/m-p/3216073#M551331 Jarvis IT 2020-02-21T18:38:55Z Re: WIFI 802.1x Anyconnect Posture with ISE scans for compliance every 20seconds. Wired 802.1x is fine. https://community.cisco.com/t5/network-access-control/wifi-802-1x-anyconnect-posture-with-ise-scans-for-compliance/m-p/3216769#M551332 <P>Appears to be not what I thought.</P> Wed, 15 Nov 2017 06:13:43 GMT https://community.cisco.com/t5/network-access-control/wifi-802-1x-anyconnect-posture-with-ise-scans-for-compliance/m-p/3216769#M551332 Jarvis IT 2017-11-15T06:13:43Z