topic Hi MattISE 1.4 supported in Network Access Control

Support for Windows 10

Matt Moore — Mon, 11 Mar 2019 05:47:30 GMT

We are currently running ISE 1.3 with the AnyConnect client at a University. Since Windows 10 is coming out as a free upgrade for individuals running Windows 7 and Windows 8 later later this month. We are expecting to see quite a few students coming to campus with windows 10 on their computers.

Has Cisco begun testing and building support for Windows 10? Has anyone else done any testing on their own. Does the AnyConnect client work under Windows 10? Does it detect the OS properly?

currently ISE do not support

Venkatesh Attuluri — Thu, 11 Jun 2015 11:27:42 GMT

currently ISE do not support windows 10 preview. You can check ISE compatibility list once win10 officially released.

I've have been testing

maximtuliuk — Thu, 11 Jun 2015 18:57:15 GMT

I've have been testing Windows 10 Preview and I see that Windows 10 does't support dot1x at all! Also, my colleagues mention that Microsoft completely removes a NAP agent and there is no replacement so Windows 10 doesn't support 802.1X anymore.

Have you got the same observation?

Thanks

Hi MattISE 1.4 supported

stanleylin1986 — Fri, 23 Oct 2015 03:53:59 GMT

Hi Matt

ISE 1.4 supported Windows 10, as the following

http://www.cisco.com/c/en/us/td/docs/security/ise/1-4/release_notes/ise14_rn.html#86839

Windows10 does dot1x just

jan.nielsen — Fri, 23 Oct 2015 19:58:38 GMT

Windows10 does dot1x just fine, NAP is not a 802.1x supplicant, it's microsofts old attempt to implanting NAC type solutions.

Hi jan.nielsen,

Pranav Gade — Sun, 15 Nov 2015 09:02:45 GMT

Hi jan.nielsen,

I also facing some issue with windows 10 with cisco ise 1.4.0.253 and patch 3.

We are trying to do machine + user authentication. We have enabled the dot1x service manually in windows 10 machine but we observed its stucking in machine authentication only its not able to proceed further for user authentication.

I have also observed even if we enabled 802,1x service manually in windows 10 with remember credential uncheck, still its not prompting for username and password.

Just because of that its not proceed further for complaint check and nac agent also not popping up.

Nac Agent version - 4.9.5.8

Compliance module - 3.6.10120.2

Have you checked with ISE 1.4 with windows 10 then just help me for the same.

Wherein we have checked this with windows 7 and its working perfectly fine with no issue.

Thanks in advance

Hi All,

cagdas.ozdemir — Wed, 20 Jan 2016 15:50:36 GMT

Hi All,

We are currently running ISE 2. Wired 802.1x working perfectly but wireless 802.1x does not. Does Cisco ISE 2 support Windows 10?

Thanks

Yes, it does support windows

Jatin Katyal — Wed, 20 Jan 2016 16:06:54 GMT

Yes, it does support windows 10 for 802.1x with ISE 2.0

http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/compatibility/ise_sdt.html#pgfId-141669

Also, what error message are you seeing in live authentication of ISE when you connect with the wireless 802.1x supplicant?

- Jatin

Hello,

cagdas.ozdemir — Thu, 21 Jan 2016 07:00:26 GMT

Hello,

We got "15440 Endpoint abandoned EAP session and started new" error.

Cagdas

Hello Jatin,

cagdas.ozdemir — Tue, 26 Jan 2016 10:47:53 GMT

Hello Jatin,

What is your opinion for error message?

Cagdas

Got the same error. The

rchockeelopez — Sat, 02 Apr 2016 14:48:04 GMT

Got the same error. The solution was to install Cisco supplicant AnyConnect NAM.

https://support.microsoft.com/en-us/kb/3121002

There is a bug with 802.1x in Windows 10 also.

Regards