https://community.cisco.com/t5/network-access-control/802-1x-switch-as-supplicant/m-p/3184355#M554827 <P>The function you are looking for is named "NEAT", here is an example-config:</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/lan-switching/8021x/116681-config-neat-cise-00.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/lan-switching/8021x/116681-config-neat-cise-00.html</A></P> Thu, 14 Sep 2017 20:11:59 GMT Karsten Iwen 2017-09-14T20:11:59Z https://community.cisco.com/t5/network-access-control/802-1x-switch-as-supplicant/m-p/3184340#M554826 <P>Hello,<BR /><BR />I'm wondering if you can setup a switch to connect to the network as an 802.1x supplicant? I would like to be able to connect a switch to an existing switch on our network and assign a vlan to the port it was connected too. I can't seem to search for documentation reguarding this as all results are returned with cleint authentication through a switch.<BR /><BR />Thanks,<BR />Dan.</P> Fri, 21 Feb 2020 18:34:10 GMT https://community.cisco.com/t5/network-access-control/802-1x-switch-as-supplicant/m-p/3184340#M554826 dan.letkeman 2020-02-21T18:34:10Z https://community.cisco.com/t5/network-access-control/802-1x-switch-as-supplicant/m-p/3184355#M554827 <P>The function you are looking for is named "NEAT", here is an example-config:</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/lan-switching/8021x/116681-config-neat-cise-00.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/lan-switching/8021x/116681-config-neat-cise-00.html</A></P> Thu, 14 Sep 2017 20:11:59 GMT https://community.cisco.com/t5/network-access-control/802-1x-switch-as-supplicant/m-p/3184355#M554827 Karsten Iwen 2017-09-14T20:11:59Z