topic 802.1x Implementation - Machine Authentication in Network Access Control

802.1x Implementation - Machine Authentication

CSCO10729468 — Fri, 21 Feb 2020 18:18:54 GMT

Hello friends...

I am trying to implement 802.1x in my network, but I have a problem.

I have an environment with Cisco ACS appliance 4.1.2.12, switches 3560 12.2(37)SE1 and clients Microsoft Windows XP and 2000.

My problem is: I want to implement Machine Authentication with PEAP. When I use MS-PEAP (native Windows) the ACS don`t log and the access is not permitted, but when I use Cisco-PEAP (SCC) every works perfectly.

Could you help me? I need that 802.1x works with MS-PEAP...

Regards,

Cris

Re: 802.1x Implementation - Machine Authentication

rochopra — Mon, 13 Aug 2007 21:06:01 GMT

Following links can help you with the configuration:

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml#t21

Hope this helps

~Rohit

Re: 802.1x Implementation - Machine Authentication

rochopra — Mon, 13 Aug 2007 21:13:20 GMT

I think the issue is with client setup as with cisco supplicant its working fine.

Make sure you have "Authenticate as computer when computer information is available" is selected on client

For Win Xp install this hotfix and check if it works:

http://support.microsoft.com/kb/885453