topic Re: i m getting user rejection in Network Access Control

i m getting user rejection

Ibrahim Jamil — Fri, 21 Feb 2020 18:37:52 GMT

Hello Guys

pls see attachment

i m getting user rejection , whats wrong i have done on the allow policy i have created instead of the default policy with denyAccess

thanks

ajc — Thu, 02 Nov 2017 20:40:51 GMT

check this.

Ibrahim Jamil — Thu, 02 Nov 2017 20:57:37 GMT

Thanks for ur reply

why its end up in the default policy with denyAccess , why it didn't pick the specified rule for this login

kindly have a look to the attachment

thanks

ajc — Thu, 02 Nov 2017 20:59:57 GMT

Go to live logs and take an screenshot about the details on the failed connection.

Ibrahim Jamil — Thu, 02 Nov 2017 21:04:33 GMT

Attached

see , it works if i change the denyAccess to internal user in the Default rule

thanks

Rob Ingram — Thu, 02 Nov 2017 22:10:23 GMT

If it is not hitting the rule it is probably because the rule is incorrect. I think you need to try - Radius:NAS-Port-Type

ajc — Fri, 03 Nov 2017 01:17:06 GMT

I sent you a msg, try changing the rule you created as suggested

Ibrahim Jamil — Fri, 03 Nov 2017 07:44:20 GMT

Thanks Abraham for solving my issue

Thanks all

Ibrahim Jamil — Fri, 03 Nov 2017 07:44:53 GMT

thanks rji