topic Re: ise backup stuck at 20% in Network Access Control

ise backup stuck at 20%

wyfy-2015 — Fri, 21 Feb 2020 18:45:09 GMT

Hi,

ise backup stuck at 20%

Backup is in progress... .I was told to upgrade the version (2.0.1.130)

Still

Any idea ?

Thanks

Re: ise backup stuck at 20%

Mark Elsen — Fri, 09 Feb 2018 11:32:23 GMT

- And did you upgrade ? Are you using an internal or exernal repository.? If it's exernal check your used-protocol sever's logfile ; watchout for any errors in there; for instance if tftp is used; check your tftp-server's logfile. If it's an internal repository ; check wether you have sufficient disk space.

Re: ise backup stuck at 20%

wyfy-2015 — Fri, 09 Feb 2018 12:07:42 GMT

Hi,
yes i upgraded ?
used-protocol sever's logfile ? You mean ise logs ?
Thanks

Re: ise backup stuck at 20%

Mark Elsen — Fri, 09 Feb 2018 17:20:13 GMT

- What I mean is , that if you use an external repository and tftp is used for data-transfer ; to go to your external repository-server and examine the tftp server's functionality by examining it's logs and or error logs (if any).

Re: ise backup stuck at 20%

wyfy-2015 — Sat, 10 Feb 2018 08:30:40 GMT

Hi,

The repository is working fine . I can see ise has authenticated against the sftp server

Backup stay long at 20% then get aborted .

Thanks

Re: ise backup stuck at 20%

Mark Elsen — Sat, 10 Feb 2018 11:04:58 GMT

- Which error are you getting when the backup get's aborted ?