topic Cisco ISE Reporting in Network Access Control

Cisco ISE Reporting

jlizzio — Tue, 25 Feb 2020 19:03:48 GMT

Hello fellow professionals,

I have a question around reporting and its capabilities in ISE.

Under the RADIUS Live Logs there is an option for filtering by Authorization Profiles. What I'd like to see is that same Authorization Profile filtering under Reports (RADIUS Authentications), but I do not see it listed there. Live logs only provides the last 24 hours wheres reporting goes back 30 days.

I'm running version 2.3 patch 6

Thanks,

-John

Re: Cisco ISE Reporting

Mohammed al Baqari — Wed, 26 Feb 2020 03:04:32 GMT

If you go under Operations > Reports > Endpoints and Users > Radius
authentication, then you can filter using auth profile

**** please remember to rate useful pots

Re: Cisco ISE Reporting

jlizzio — Wed, 26 Feb 2020 17:15:52 GMT

Thanks for the reply.

That was where I was attempting to run the report from. There are quite a bit of fields to sort by but unfortunately Authorization Profiles is not one of them.

If you can see maybe it's a limitation of the version I am running.

Re: Cisco ISE Reporting

Damien Miller — Wed, 26 Feb 2020 17:32:21 GMT

It could be a limit within 2.3, with 2.4+ it is there. You can check the rear on the right to see if it is an option just not being shown on the report right now.

Re: Cisco ISE Reporting

jlizzio — Wed, 26 Feb 2020 17:53:34 GMT

It wouldn't surprise me if it wasn't in 2.3. It is however Auth Profile and not the Rule.