Posture Implementation through ISE

gurbinder.kabbay — Wed, 18 Mar 2020 15:58:39 GMT

I want to Implement a Posture in my lab, I have ISE server and VMs machines.

for Posture Use case, I have to do Client Provisioning and i have to do the following. kindly guide me if something can be skipped, because I dont have internet connectivity in LAB and it is a remote LAB and internet connectivity is big challenge for me.

1. In Client provisioning I have to download compliance module from cisco site through ISE. can we download it from somewhere else and then I can upload it on ISE from local disk ?

2. I have to upload webdeoploy package : its done and uploaded from local disk on ISE.

3. I have to create NAM profile. from where I can install this NAM and where i can install it (on end point or from any machine to make customize package, is it Mandatory to make customize package or we can skip it.

4. I have to configure native profile.

5. I have to configure Any connect configuration, in which i will map NAM profile, package file and compliance module file.

6. I have to configure posture module.

Big Question: can i implement Posture without internet connectivity in the network.

Thanks

Garry

Re: Posture Implementation through ISE

Cristian Matei — Wed, 18 Mar 2020 17:09:25 GMT

Hi,

Speaking strictly about posture:

1/2. Download anyconnect client and compliance module

3. NAM module of AnyConnect is not required for posture

4. Not sure what you mean by native profile, maybe you mean native supplicant profile or what?

5. No NAM for posture

6. You mean posture policy

You can deploy posture and profiling and everything without Internet connectivity for ISE, but you would have for example to manually import posture updates, profiling updates (if you use profiling).

Use these guidelines for Posture, Profiling and 802.1x:

https://community.cisco.com/t5/security-documents/ise-profiling-design-guide/ta-p/3739456

https://community.cisco.com/t5/security-documents/ise-secure-wired-access-prescriptive-deployment-guide/ta-p/3641515

https://community.cisco.com/t5/security-documents/ise-posture-prescriptive-deployment-guide/ta-p/3680273

Regards,

Cristian Matei.

topic Posture Implementation through ISE in Network Access Control

Posture Implementation through ISE

Re: Posture Implementation through ISE