topic Re: Cisco ISE command sets Regex query in Network Access Control

Cisco ISE command sets Regex query

sondevi — Fri, 15 Mar 2019 07:17:33 GMT

Hi Team,

regex for command sets, having a query: In command set, configuring as below:

Command: undo

Arguments: ospf bgp mpls

requirement is to put the regex in argument so user should not be able to run the "undo ospf" or "undo bgp" or "undo mpls" commands.

I tried with [ospf bgp mpls] but i think it differentiate the character only. not the alphabets.

Any input please.

sondevi — Wed, 20 Mar 2019 08:04:18 GMT

Any input here, please

saxenanitesh8522 — Wed, 20 Mar 2019 08:42:06 GMT

Hi,

this have to be three different arguments added in the command reference

undo mpls

undo ospf

undo bgp

it wont work as what you are trying to do.

The commands have to be same as what you are entering the cli.

Craig Hunt — Fri, 27 Mar 2020 14:27:24 GMT

Have you tried using the pipe character ( | ) in between each one? This is often used for 'or'.

Grant: DENY

Command: undo

Arguments: ospf|bgp|mpls