Cisco ISE - Wireless Certificate Based Authentication

MohamedSamer47595 — Fri, 12 Jun 2020 13:49:05 GMT

I have an issue on Cisco ISE VM 2.3, after renewing the attached certificate, wireless users can't authenticate and we get the following log;

22045 Identity policy result is configured for password based authentication methods but received certificate based authentication request.

So, how to change the authentication type to be certificate based authentication instead of password, I tried to find it on the ISE GUI but I couldn't find it.

Thanks

Re: Cisco ISE - Wireless Certificate Based Authentication

poongarg — Fri, 12 Jun 2020 15:24:50 GMT

Refer below document:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/214975-configure-eap-tls-authentication-with-is.html
Check under the Identity Source Sequence called under the authentication policy for wireless users, if certificate authentication profile is unchecked.

topic Re: Cisco ISE - Wireless Certificate Based Authentication in Network Access Control

Cisco ISE - Wireless Certificate Based Authentication

Re: Cisco ISE - Wireless Certificate Based Authentication